5 Cause and Solution Printer Output is Striped and Dotted. For those of you who have a printer, you may have experienced this, namely the Printer Print Outcomes and Dotted so that it is very annoying especially the data you are going to print is very important for your work. However, striped and dotted prints can indeed occur on the printer because of experiencing a minor trouble or even very fatal and is common for Epson, Canon, HP, and other printers.
If you ask why the Printer Print Results are lined and dotted then the simple answer is that you use the printer too often or even your printer has not been used for a long time so the results will be like the case above. details so that you better understand the condition of your printer, as well as a solution to fix it if you experience the above.
Actually, if it can still be handled, Lined Printer Print Results and intermittent Printer Print Results can be done with a simple method, but if it is too fatal then the last solution is to buy the newest cartridge. However, if you buy a cartridge this will certainly be burdensome for you.
If you ask why the Printer Print Results are lined and dotted then the simple answer is that you use the printer too often or even your printer has not been used for a long time so the results will be like the case above. details so that you better understand the condition of your printer, as well as a solution to fix it if you experience the above.
Actually, if it can still be handled, Lined Printer Print Results and intermittent Printer Print Results can be done with a simple method, but if it is too fatal then the last solution is to buy the newest cartridge. However, if you buy a cartridge this will certainly be burdensome for you.
 |
| 5 Cause and Solution Printer Output is Striped and Dotted |
So that you are not curious and you are more familiar with the causes of printer results, our striped and dotted printer from printer surgery will discuss it a little in this article.
1.Head Clogged Cartridge
This problem occurs because you let the rinter not print so that the ink clots on the cartridge head, the infusion tube which is also not maintained enough cleanliness can make the cartridge head problematic.
The solution:
- Please clean it in a subtle way on the head using a tissue
- Soaking the cartridge with warm water (We recommend less)
- If necessary, please cartridge to the nearest service
1.Head Clogged Cartridge
This problem occurs because you let the rinter not print so that the ink clots on the cartridge head, the infusion tube which is also not maintained enough cleanliness can make the cartridge head problematic.
The solution:
- Please clean it in a subtle way on the head using a tissue
- Soaking the cartridge with warm water (We recommend less)
- If necessary, please cartridge to the nearest service
2. Dirty and Inked Timing Strip or Encoder.
The timing strip or printer encoder can result in poor print results, this is due to the frequent use of the printer so that the printouts get stuck and cause the encoder to be exposed to ink or dirt. this results in the encoder difficult to read by the cartridge machine.
The solution:
- You just need to clean the Encoder on the back of the cartridge using a soft tissue, but try to clean it carefully.
3. Perform Head Cleaning (cleaning the print part)
 |
| performed Cleaning |
Head Cleaning is highly recommended to try to clean it if your print results are striped or intermittent because by doing Nozle Check you can find out the normal print results on the cartridge. In addition, Head Cleaning can also remove or clean some of the ink that is in the cartridge section so that the print results are perfect.
4. Ink is not supplied to the cartridge
For infusion printers that have been modified, this will definitely experience this, where the ink that should flow on the cartridge is not even smooth because the ink is not supplied properly to the printer cartridge so that the printout will be streaked.
The solution:
Don't be late in filling the ink, get out the air in the infusion tube in a way you know, such as by pulling out the part of the tube in the cartridge so that the ink runs, pulling the ink using an injection, and pulling the ink from the cartridge head using a special tool.
5. The time of the cartridge that has exceeded the threshold
For Original cartridges, all of them have their usage levels or limits so this could be the cause of the Striped and Broken Printer Print Results for the solution we recommend is to replace your cartridge with the latest one.
